This board is a low-cost Minimum System Development Board for ARM Microcontroller – STM32F103C8T6. Board is suitable for learners that want to learn the STM32 microcontroller with ARM Coretex-M3 32-bit core.
Features:
- On-board Mini USB interface, you can give the board power supply and USB communication
- On-board test indicator LED
- On-board reset button and power indicator LED
- On-board 100ma 3.3V Regulator
- All GPIO are led out and the names of the pins are marked
- After soldering the headers, you can directly plug the board onto the breadboard
- CPU: STM32F103C8T6
- Core: ARM 32 Cortex-M3 CPU
- Debug mode: SWD (can be programmed with ST-LINK V2)
- CPU Internal Maximum Clock: 72MHz
- External Clock Source: 8MHz crystal
- 64K flash memory, 20K SRAM
- 2.0-3.6V power, I/O
Package List:
- 1 x STM32 Minimum System Development Board
Technical Information:
- The core board schematics (PDF format) and tested source. Burned into the test program, LED flashes, allowing you to detect the core board is working properly
- Provide at IAR and STVD two development environments register operation and routine operation of the library functions. Timer routine, UART transmit routine, UART receive routines, clock switching routines, AD routines and so on
- STM8 Applications
- STM8 package library
- IAR development environment, STVP programming software
STM8S103F3P6 performance comparison:
- STM8S003F3 chips only 128 bytes of EEPROM, STM8S103F3 640 bytes
- STM8S003F3 chip FLASH erase only 100 times, STM8S103F3 can erase ten thousand times
- STM8S103F2 chip FLASH only 4K bytes, STM8S103F3 have 8K bytes
- Conclusion: STM8S003F3 only suitable for mature products, STM8S003F3 core board is not suitable for development. However STM8S103F3 suitable for the development of the use of, our board of this development is the use of this chip
- Size:28mm*17mm*5mm/1.1*0.66*0.19″
