This module can be easily installed to control lights in corridors, bathrooms, and other areas where automatic lighting is beneficial. Here’s a detailed overview:
Features:
1.Passive Infrared Detection: Senses human body movement to trigger the light.
2.AC 220V Operation: Directly connects to 220V AC power, suitable for household lighting systems.
3.Small Head Module: Compact design allows for discreet installation.
4.Embedded Concealed Probe: The sensor can be embedded in ceilings or walls for a clean look.
5.Intelligent Delay: Automatically turns off the light after a preset delay time if no further movement is detected.
6.Light and Sound Control: Can be combined with sound sensors for enhanced functionality.
Specifications:
•Operating Voltage: AC 220V
•Detection Range: Typically 5-7 meters
•Detection Angle: 110° to 140°
•Delay Time: Adjustable from a few seconds to several minutes
•Load Power: Suitable for loads up to 800W (incandescent) or 200W (LED/CFL)
•Ambient Light Sensitivity: Adjustable to operate during day/night or only at night
Installation:
1.Wiring:
•Live (L) and Neutral (N) Wires: Connect the AC 220V power supply to the designated terminals on the module.
•Load Connection: Connect the lamp to the output terminals of the sensor module.
2.Mounting:
•Install the sensor module in the ceiling or wall at the desired location.
•Ensure the sensor head is exposed for optimal detection coverage.
3.Adjustments:
•Set the delay time using the adjustment knob or screws on the module.
•Adjust the ambient light sensitivity if the module has this feature.
Application Example:
•Corridor Lighting: Install the sensor in a corridor ceiling. When a person enters the detection zone, the sensor will turn on the light. The light will remain on as long as movement is detected and will turn off after the preset delay time once the area is vacated.
Precautions:
•Proper Installation: Ensure all connections are secure and the module is properly insulated.
•Avoid Obstacles: Place the sensor in a location free from obstructions that could block the infrared signal.
•Test the System: After installation, test the sensor to ensure it detects motion and controls the light as expected.
If you need further assistance with wiring diagrams or specific setup details, feel free to ask!
